| Camera Accessories Systems |
|
|
|
| INFINITY OPTICS PL MOUNT DIRECTOR'S FINDER |
DAY RATE |
35mm standard format, includes ground glass.
Uses the same PL mount lenses the camera sees through to determine accurate framing and composition without having to set up the camera. Lenses are not included. |
|
35.00 |
|
|
|
|
|
| KENYON GYRO STABILIZER |
DAY RATE |
| For use with hand held 16mm and video cameras up to 16 lbs. Attaches quickly; "heavy-metal gyro rims" enable maximum stabilization in a minimum casing size. 3 hours running time on a fully charged power pack. |
|
|
| MDL
KS-3 for cameras up to 6 lbs. |
50.00 |
| MDL
KS-4 for cameras up to 8 lbs. |
50.00 |
| MDL
KS-3 (double) for cameras up to 12 lbs. |
60.00 |
| MDL
KS-4 (double) for cameras up to 16 lbs. |
70.00 |
|
|
|
| IMERECT LOW ANGLE PRISMS |
DAY RATE |
| Designed for use with 16mm and 35mm motion picture cameras and most ENG/EFP video cameras to allow positioning of film or video camera for ground or tabletop level, point-of-view photography. Prisms needs no additional lenses or adapters and mount on a standard Arriflex bridgeplate (support bases) and iris rods. Model 500 for 16mm and ENG/EFP cameras. Will accept a 9.5mm wide angle lens. |
|
175.00 |
Model
925 is the larger version of model 500 and is designed
for 35mm motion picture cameras and many video cameras.
Will accept a 20mm wide angle lens.
|
200.00 |
| Bridge
plate and iris rods |
15.00 |
|
|
|
| REVPOD PRODUCT TURNTABLE |
DAY RATE |
| Revolving product turntable with programmed speeds and stops for tabletop photography. 9 3/4" diameter, 1/2" thick turntable can support up to 50 lbs. mounted in thrust and rotational ball-bearings. Rotates from 0 to 8 rpm continuously or with a pre-determined stop. Powered by 12VDC and has four individually adjustable legs for uneven surfaces plus built-in levels for 'x' and 'y' levelling. Weighs 14 1/2" lbs. Includes AC power supply. |
|
100.00 |
| 12V battery belt |
15.00 |
|