Used Tripods and Supports
Arriflex Arrihead MKI Geared Head
- Tilt angle: +-30 degrees, +-90 degrees with tilt plate
- Tilt plate increments: 13,20,25,30,40,50,60 degrees
- Camera mounting: touch and go system (quick release)
Bridge Plate and Dovetail Combo for 35mm
Bridge plate for Super-35 and Standard-35 cameras with 12″ dovetail manufactured by Dalsa.
- Bridge Plate for 15mm support top/bottom plate
- 12″ Dovetail
- 3/8-16 tie…
Easyrig Cinema 3
- Soft carry bag
- Choice of spring: 400n, 600n, 700n, 900n.
*Additional springs available for $50/ea*
Focus Micro Jib
- Focus Micro Jib
- 100mm Mounting Plate
- Weight Extension Bar
- Sliding Weight Clamp
- Molded Tripod Case
- Glidecam X-22 Support Arm
- Glidecam Support Vest
- Glidecam X-22 Support Sled
- Docking Bracket
- Arm Post
- Operations Manual
Hot Gears Controller Kit
- Hot Gears™ is an award-winning 2-axis microprocessor remote camera controller that can be easily attached to ARRIHEAD I & II, PANAVISION’s PANAHEAD and SUPER…
J Michael Media LLC Type-S Jib Camera Crane
- Aluminum Construction
- 51″ Jib Length
- Hardigg Storm Case
- 15 lbs Capacity
Losmandy Porta-Jib Traveller
- Losmandy Porta-Jib Traveller
- 100mm Bowl Base
- Sliding Fine-Tune Weight
- 3-Piece Weight Bar
- Custom Flight Case
New OConnor 1030D 100mm Base Fluid Head
- Payload up to 30 lbs
- +/- 90 degree tilt
- Counterbalances down to zero, making it an ideal tool for lightweight cameras, too.
New OConnor 1030DS 100mm Base Fluid Head
- O’Connor 1030DS Fluid Head with 100mm base.
- Includes Two-Piece Pan Handle, Tie Down, QR Plate, 3/8-16 Cam Screw, and 1/4-20 Cam Screw.
OConnor 1030B 100mm Base Fluid Head
- S/N 399017
- O’Connor 1030B Fluid Head with 100mm base.
- Includes Two-Piece Pan Handle, Tie Down, QR Plate, 3/8-16 Cam Screw, and 1/4-20 Cam…
OConnor 1030HDs 100mm Base Fluid Head
- S/N 380365
- O'Connor 1030HDs Fluid Head with 100mm base.
- Includes One-Piece Pan Handle, Tie Down, QR Plate, 3/8-16 Cam Screw, and 1/4-20 Cam…
OConnor DVs 100mm Base Fluid Head
- S/N 279231
- O’Connor DVs Fluid Head with 100mm base.
- Includes One-Piece Pan Handle, Tie Down, QR Plate, and 3/8-16 Cam Screw.
- Case and…
Ronford Baby Tripod Case
Case for Ronford-Baker Baby Tripods
Ronford HD Mitchell Baby Tripod
*Case Sold Separately
Ronford HD Mitchell Tall Tripod
Materials and Finish
Castings are LM25 anodised, stove enamelled
black texture. Tubes are 1” dia x 16swg HE30TF
alloy, polished and anodized, with nylon wipers and
Sachtler 150mm Baby Legs
Sachtler 150mm Heavy Duty Tall Tripod
Sachtler 150mm Tall Tripod
Sachtler Video 20 P and 2-Stage Carbon Fiber Heavy Duty Legs
- Sachtler Video 20 P Fluid Head
- 2-Stage Carbon Fiber Heavy Duty Tripod
- Ground Spreader
- 2-piece pan handle
- QR Plate
- 3/8-16″ Camera Screw
Sachtler Video 30 II Rebuilt and Repainted
- Fully rebuilt and repainted
- Supports up to 110 lbs. and 60° to 60° tilt. Weighs 21 lbs.
- **Hi-hat not included**
Super Worrall-25 Sammy’s
- Used Super Worrall-25 Sammy’s geared head
- Includes: (2) gear cranks, tie down, and case.
- Serviced by a factory trained technician.
- Hi-Hat not included.
Tall Tripod Case
Ronford-Baker Mitchell tall tripod accessory.
Used Heavy Duty Spreaders
All spreaders are fully serviced and have new Bungee™ elastic tie-downs. Manufacture and cosmetic condition of spreaders will vary.
Cartoni C40 Dutch Fluid Head
- 7 settings for counterbalance
- 110lb (50kg) max capacity; +/- 65° tilt
- Includes QR plate, pan arm, (2) 3/8″ screws, and case
Sachtler Video 20 (100mm Base)
55lb max capacity; 7 grades of drag in pan and tilt
Includes QR plate, pan arm, tie down, (1) 1/4-20 and (1) 3/8-16 screws
Sachtler 7+7 Fluid Head (150mm Base)
110lb (50kg) max capacity; +90° to -60° tilt
Includes QR plate, pan arm, tie down, (2) 3/8″ screws, and case
*Hi Hat not included
Chapman Leonard Lencin Compact Pedestal
- Hold Column at Any Height (Friction Brake)
- Special Performance Enhancing Tire Compound
- Can Be Used Indoors and Outdoors
- Virtually Silent Operation
- Incorporates Both…