The Single-Axis Lens Control Kit contains everything you need to get started with wireless lens control. It includes a single-axis CTRL.1 hand unit for precision focus pulling, a 2-channel MDR-M receiver, and a MK3.1 motor with additional accessories.

• 1 x Teradek RT Pre-Marked focus Ring - 10" minimum focus
• 1 x Teradek RT Pre-Marked focus Ring - 20" minimum focus
• 1 x Teradek RT Pre-Marked focus Ring - 3'6" minimum focus
• 1 x Teradek RT Pre-Marked focus Ring - 6' minimum focus
• 1 x Teradek RT Pre-Marked focus Ring - 10' minimum focus
• 1 x Teradek RT Pre-Marked Iris Ring - 1-32
• 1 x Firmware License Key Card for TeradekRT With License Key1 x Controller Neck-strap [11-1443]
• 1 x LP-E6 1600mAh Li-ion Battery [14-0014-1]
• 1 x LP-E6 Travel charger [14-0015]
• 1 x Receiver Rail Clamp for 15/19mm rods [11-1439]
• 1 x Additional White disc (Type B) note: 1 white disc preinstalled on CTRL.1 [11-1459]
• 1 x Latitude-M Receiver [15-0008]
• 1 x MOTR.X Motor, 15/19mm rod motor bracket, 0.8 lens gear [15-0044]
• 1 x CTRL.1 Single-Axis Controller [15-0043]
• 1 x Mini-USB (5pin) to USB - 18 in Cable (Firmware) [11-1267]
• 1 x Latitude DTAP Power Cable [11-1378]
• 1 x Latitude Motor Cable 16in/40cm Straight to Straight [11-1462]
• 1 x 5pin conn to USB Micro_0.2m [11-1469]
• 1 x Teradek Vinyl Zipper Bag 250x150mm [11-0808]
• 1 x 6.5 ft (2m) Controller Wired Mode Cable 5-pin to 5-pin [11-1413]
• 1 x Teradek Case Large - Black with RT Motion Single Channel Controller Set Foam [28-0068-7]